Search our store
£59.00 £70.80 (Inc. VAT)
Thermapen Surface Probe
Product code: 231-212
The surface probe is particularly useful in determining the temperature of hot plates or pipe temperatures etc.
Please note the accuracy and speed of response will be dependant on whether the surface is flat and heat transfer compound is used.
The Thermapen thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C.
The resolution can be switched to 1 °C, if required, via a switch in the battery compartment.
The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable.
Each Thermapen is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
The Thermapen thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use.
The casing is washable and includes ‘Biomaster’ additive that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food.
|Measurement Range||-49.9 to 299.9°C|
|Resolution||0.1 °C or 1°C – user selectable|
|Accuracy||±0.4°C (-49.9 to 199.9 °C) otherwise ±1 °C|
|Battery Type||2 x 3 volt CR2032 lithium coin cell|
|Battery Life||1500 hours|
|Sensor Type||K thermocouple|
|Dimensions||19 x 47 x 153mm|
|FREE traceable certificate of calibration included|
ETI Thermometer holder £6.60
Thermapen protective holster with belt loop £5.00
ETI Thermapen silicone protective boot £4.00
ETI Thermapen CR2032 lithium coin cell battery – 3v £0.95