Search our store

£105.00 £126.00 (Inc. VAT)

Product Description

ETI Stainless Steel ThermaData Logger

Product code: 293-900

 

inless Steel ThermaData® data logger range – ideal for food, pharmaceutical and other high temperature applications.

  • integral USB interface for setup and download
  • wide temperature range -20 to 105°C
  • food grade 316 stainless steel housing
  • three models available
  • UKAS 3 point certificate available at extra cost

 

Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP66/67).

The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® stainless steel data logger will continue recording during and after downloading the data.

Three models of the stainless steel ThermaData® loggers are available, one with with internal sensor and two with optional standard fixed probe dimensions of :

  • Ø3.3 x 50 mm probe
  • Ø4.5 to Ø3.3 mm tip x 100 mm probe

Each logger is supplied with a two metre USB lead and ThermaData® Studio software.

 

 

ThermaData® Studio PC software
The ThermaData logger is connected to a PC via the internal USB connector or a USB lead (supplied). By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The user can also set, within the software, high and low alarm values for a specific application. The information can then be analysed by zooming in, saving as a ‘studio file’ or exporting to other software packages.

USB Connection Point:-  Simply unscrew the end cap to access the USB port. This allows the user to connect the logger to a PC and upload any data collected

 

Technical Data
Specification Stainless Steel ThermaData® data logger
Range -20 to 105 °C
Operating range -20 to 105 °C
Resolution 0.5 °C
Accuracy ±1 °C (±0.5°C with calibration utility)
Memory 2048 readings
Sample rate 1 to 255 minutes
Battery 3.6 volt half AA lithium
Battery life 3 years minimum
Dimensions 130 x 22 mm ( exc probe )
Weight 45 grams

EAN Code:5024368156877

Related Products